Artificial Green Walls for Your Balcony

Yes. Artificial green walls work particularly well on apartment balconies because they add greenery and privacy without taking up much floor space. Instead of filling a small balcony with pots and planters, you can use the vertical surface of a wall or railing and keep the floor available for seating, a table, or other furniture.

They are also much easier to maintain than living balcony plants. There is no watering, pruning, soil, drainage, or concern about whether the balcony receives enough natural light. For exposed balconies, however, make sure you select greenery specifically designed for outdoor use. Our outdoor UV-resistant range includes artificial green walls and plants intended for balconies, patios, rooftops, and other exterior spaces.

For more detailed product comparisons, see our guide to the best artificial green wall panels for small apartment balconies.

Artificial greenery that is not designed for outdoor exposure can fade, become brittle, or deteriorate when exposed to strong sunlight for long periods. That is why it is important to choose a panel specifically rated for outdoor use rather than assuming every artificial green wall can be installed outside.

Our outdoor-rated greenery uses UVTex® technology, which incorporates UV stabilizers into the foliage material during manufacturing. This provides greater protection against sun exposure than an untreated artificial plant or panel. You can learn more about how this works on our UVTex technology page.

Our UVTex-certified outdoor range is also backed by a five-year UV warranty. Even with UV-resistant greenery, it is still a good idea to maintain the panels regularly and follow the recommended care instructions.

Yes. Metal, wire, tubular, and similar balcony railings are among the easiest surfaces for installing artificial green wall panels.

The panels can usually be attached using outdoor-rated cable ties threaded through the backing grid and around the railing. 

For exposed balconies, additional fixing points may be needed to reduce movement in the wind. The panels can also be connected to one another before being attached to the railing, which helps create a more continuous finish.

Our artificial green wall installation guide includes specific instructions for mesh, tubular, railing, masonry, timber, and other surfaces.

Yes. In many cases, drilling is not necessary.

If you have a metal or open balcony railing, artificial green wall panels can often be secured directly to the railing using cable ties. This makes the installation relatively easy to remove later and can be particularly useful for renters who do not want to drill into walls or make permanent alterations.

If you have a solid balcony wall where drilling is not permitted, another option is to attach the panels to a freestanding trellis, timber frame, or lightweight support structure. The entire green wall can then sit in front of the existing wall without being permanently attached to the building. Our balcony guide covers both zip-tie and freestanding installation options.

Start by measuring the width and height of the surface you want to cover. Multiply those measurements to calculate the total area, then compare it with the coverage provided by your chosen panel.

Do not assume every artificial green wall panel is the same size. We offer several panel dimensions, including 40 × 40-inch, 40 × 20-inch, and 35 × 35-inch options. That means the number required can vary significantly depending on the panel you select.

It is also sensible to allow some extra material when you need to cut around corners, railing posts, pipes, or irregular edges. The artificial living wall collection includes a coverage calculator that uses the dimensions of the selected product and can account for additional material needed for trimming.

Measure carefully before ordering—balcony railings are often less rectangular than they first appear.

Yes. Privacy screening is one of the strongest uses for artificial green walls on balconies.

Dense foliage panels can help reduce direct sightlines through open metal railings and between neighboring balconies while also softening concrete, steel, and other hard architectural surfaces. Unlike living hedges, you do not have to wait months or years for the greenery to grow dense enough to provide meaningful coverage.

For maximum screening, dense boxwood-style panels tend to work particularly well because the foliage sits relatively close to the railing while providing consistent coverage. Mixed foliage panels are better when the green wall is also intended to be a decorative focal point.

Our guide to transforming a balcony with artificial boxwood shows several approaches, including railing privacy screens, feature walls, and freestanding greenery.

They can be suitable for windy balconies, but the installation method becomes much more important.

High-rise and exposed balconies can experience much stronger gusts than ground-level patios. The panels therefore need to be secured at enough points to prevent the backing from lifting, flapping, or pulling away from the railing. Our balcony guidance recommends using outdoor-rated ties or suitable mounting hardware at closer intervals in exposed locations.

Adjacent panels should also be properly connected so that individual sections cannot move independently. Check the installation periodically, especially after storms or extreme weather, and replace any damaged or deteriorated fixings.

For very exposed balconies, building restrictions and wind-load considerations may also apply. If you are unsure, check with your building manager or a qualified installer before mounting a large screening area.

Yes. One of the advantages of modular artificial green wall panels is that the backing grid can usually be trimmed to fit awkward balcony dimensions.

You can cut around railing posts, corners, pipes, electrical fixtures, drainage points, or other obstacles rather than being limited to a perfect rectangular installation. Standard scissors may be sufficient for many backing grids, while heavier material may require stronger cutters.

Plan your cuts from the back of the panel and avoid cutting through foliage stems unnecessarily. It is also better to measure twice before trimming—once the backing has been cut, that section cannot be restored.

Our step-by-step artificial green wall installation guide explains how to measure, connect, trim, and install panels across different surface types.

Balcony green walls generally need more cleaning than indoor installations because they are exposed to dust, pollen, rain residue, pollution, and sometimes salt air.

Start by removing loose leaves, cobwebs, and debris. Then use a soft brush, feather duster, or microfiber cloth to remove surface dust. Outdoor plastic foliage can usually be given a gentle clean with water where appropriate, but avoid aggressive pressure washing or harsh household chemicals that could damage the foliage or protective finish.

If the wall is exposed to heavy environmental buildup, clean it section by section so you can reach the foliage beneath the outer layer as well.

Our artificial plant and green wall cleaning guide covers the complete maintenance process. If your balcony receives strong sunlight, take extra care to use cleaning methods that will not damage the UV protection.

There isn't one panel that is best for every balcony. The right choice depends on what you are trying to achieve.

For maximum privacy and minimal depth, dense boxwood panels are usually the strongest option. Their compact foliage creates a consistent screen without extending far into an already-small balcony.

For a feature wall close to your seating area, mixed foliage such as fern or varied vertical garden panels can look more natural up close because they use different leaf shapes, textures, and shades of green.

For a tropical or resort-style balcony, larger-leaf tropical panels can create a more dramatic focal point, while lighter green boxwood can work well on shaded balconies where very dark foliage may feel visually heavy.

If you're unsure, ordering a physical sample is a smart step because you can compare the foliage against your flooring, furniture, railing, and natural light before buying full-size panels. We have a dedicated artificial green wall sample collection with boxwood, fern, jasmine, tropical, and mixed-foliage options.